View Single Post
  #5  
Old 12-21-2010, 06:23 AM
paddyob's Avatar
paddyob paddyob is offline
Member
 
Join Date: Oct 2008
Location: Edmonton
Posts: 2,481
paddyob is on a distinguished road
Default

Quote:
Originally Posted by RDNanoGuy View Post
A 72x18 on a proper weight distributing stand will put less than 150 lbs. pressure per square foot on the whole area... You put more pressure than that just standing on the floor. Just put the tank against a load bearing wall and you'll be fine.

How many stands have 12"x12" legs? Mine has 1"x1" feet on the stand. So if you factor that.... we as people spread out over a more equal and larger space... so comparing a persons weight to a tanks weight does not seem like apples to apples.... now if someone out there has small feet......


Be careful. I agree with other statements... if you can't confirm 100%, its not a good idea. No matter what advice and knowledge people may have, they don't know YOUR house.

Older houses have problems just like new houses. The age does not mean it is more stable. You may have had termites in the house years before (bad example I am sure) but you need to be 100%. A 90 gallon tank water filled is about 720 pounds... not counting glass weight/rock/sump... etc.

Use caution.... make the best choice for you. If you really want to go large... I would recommend talking to your land lord or someone qualified to tell you whether or not you need additional supports.
__________________


My 70 Gallon build:

http://www.canreef.com/vbulletin/showthread.php?t=66478


My Mandarin Paradise:

http://www.canreef.com/vbulletin/showthread.php?t=72762



I wonder... does anyone care enough to read signatures if you make them really small? I would not. I would probably moan and complain, read three words and swear once or twice. But since you made it this far, please rate my builds.
Reply With Quote