So here is the wiring diagram and parts list
The resistors are there to easily measure the amps since this is a parallel design.
Fuses are in for "o ****" protection
Terminal blocks for ease of wiring
Doing this setup doesnt really give me plug in play modules but rather a full 72in fixture.
Resistors x 12:
$1.05 ea
http://search.digikey.com/scripts/Dk...me=UB5C-1.0-ND
1A Fuses x 12 (for Royal Blues): These are 1A. And could be used in most cases in 700ma up to maybe 900mA setups.
$0.83 ea
http://search.digikey.com/scripts/Dk...ame=F3169CT-ND
1.5A Fuses x 12 (for Cool Whites): could be used in most cases in 1.2A up to maybe 1.4A setups.
$0.83 ea
http://search.digikey.com/scripts/Dk...&name=F2319-ND
Terminal Block x 4: These are 12 position
$3.80ea
http://search.digikey.com/scripts/Dk...name=A98510-ND
Terminal Block Jumper x 20:
$.025 ea
http://search.digikey.com/scripts/Dk...&name=A0139-ND
10x10 Heatsink x 3
$31.17 ea
http://www.ledgroupbuy.com/products/...x-10-inch.html
*note might be changing this due to weight issues
****NOTE THIS DRIVER HAS CHANGED BECAUSE IT WILL NOT DIM UNDER 50%**********
Cool white dimmable driver (HLG-240-42B 42v 5.72 amps)
$118.31
http://wattsupply.com/s.nl/it.A/id.3056/.f
****NOTE THIS DRIVER HAS CHANGED BECAUSE IT WILL NOT DIM UNDER 50%**********
Royal Blue dimmable driver (HLG-240-54B 54v 4.45 amps)
$118.31
http://wattsupply.com/s.nl/it.A/id.3056/.f
#6-32 3/8 Length Nylon Screws (100pc) x 4:
4.64ea
http://www.smallparts.com/nylon-mach...qid=1291591373
or More expensive but in Canada:
http://search.digikey.com/scripts/Dk...l&name=H556-ND
#6-32 Tap x 1:
11.25ea
http://www.smallparts.com/butterfiel...e_name=%236-32
*I might buy this locally and order the nylon screws through digikey
Thermal Grease 2.5g x 5:
4.83ea
http://www.ledgroupbuy.com/products/...trix-2.5g.html
22awg 600v pretinned stranded wire:
$7.50 50ft
http://www.ledgroupbuy.com/products/...600-volt).html
LEDs
XP-G cool white in 10 LED series (
http://www.ledgroupbuy.com/products/...ool-White.html)
XP-E royal blue in 14 LED series (
http://www.ledgroupbuy.com/products/...oyal-Blue.html)
Ill probably end up buying 3 times as many fuses just in case.
wiring on between LEDs is 22awg
wiring from driver to blocks is 20awg
