Alright so to level this tank I grabbed a scrap peice of .108" stainless channel from work and bought the cheap screw jacks. Had to cut myself some plywood shims, ended up needing 4 on each side.
Here is what it looked like before
Cutting the c channel to length at home.
Pic of $8 dollars worth of cheap chinese machinist jacks (rated to 1k lb each)
So this is what i used minus 4 shims. I used the large scissor jack to raise the stand, then let it down on the leveling jacks. Took 4 tries to get it lvl front to back and side to side.
This is what each side looks like. Can't see the channel but it is up underneath and runs the full width.
Nice cloudy water! Aquavitro?
And what the sump plumbing looks like now
Took me 5 mins to get the tanks balanced. I have noticed that the system is somewhat self balancing.
Anyways I am pretty happy now!