Quote:
Originally Posted by Myka
Is it ok to disagree with you?  |
I'll think about it and let you know
Quote:
Originally Posted by Myka
In your case, why didn't you have to throttle it up every couple weeks? Why would your demand stay the same?
|
well I account the consistancy of the bubbles to a few things, the first being a large CO2 tank. smaller ones run out faster and you pressure starts to drop a while befor you run out so you end up getting more variation. a larger tank that stays at pretty much its full volume and will give you 1.5 to 2 years worth will be a lot more constant.
the second thing which may have more of an impact than the bottle is the regulator you are using. most of the ones being used in this hobby are true garbage. the cheepest offshore thing they could find as a good regulator would cost more than the reactor. for example a new version of my regulator would be about 350 to 450.00 retail.
as for keeping up with demand in the tank, pure size matters, most places were touting reactors that held 1 jug of media for tanks up to 200 or even 300 gal tanks, with a add on stage up to 4 or 500 gal. they had small pumps, most had no recirc for trapped gas, ect.. the one I designed was big, 4 jugs of media when full, 500 gph recirc with in the unit, gas bubble evacuation, plus a built in water reserve. I used a combanation of high flow and acidic water to desolve minerals. it was big, had a 12 X 20 foot print for the box with two 6" wide towers on the top that were about 12" tall so overall high was about 18".
Steve
__________________
*everything said above is just my opinion, and may or may not reflect the views of this BBS, its Operators, and its Members. If cornered on any “opinion” I post I will totally deny having ever said this in a Court of Law…Unless I am the right one*
Some strive to be perfect.... I just strive.