Quote:
Originally Posted by DCDN
Cant wait to see this filled. Tagging along
|
Welcome aboard
So I was thinking (always trouble when I do that) solder is a pretty good conductor of heat... and it's a lot cheaper then thermal compound I'll just solder the pipe to the aluminum... so I attach all my pipe to the aluminum and all the corners, so I have a nice long single line... I start to solder and I solder the elbow to the small connecting piece then to the other elbow... seems a little difficult but I figure it's just cause I haven't done it in a very long time... then I try to solder the elbow to the long line... not happening... I keep trying anyways... after about 5 min of going "What the heck!" I figure it out... (most people know that to solder you need both pieces to be hot enough to melt the solder so it can "stick") Well it turns out that my aluminum heat sink works well with no solder or thermal paste as it wont let the pipe attached to it heat up enough to solder it. Now I'm going to have to take all the pipe off and solder it before re-attaching it. What a pain. oh ya and there will be no soldering the pipe to the aluminum. (live and learn... darn heat-sink works too well.)
