View Single Post
  #99  
Old 04-13-2010, 02:20 PM
Canadian's Avatar
Canadian Canadian is offline
Member
 
Join Date: Oct 2001
Location: Victoria, BC
Posts: 619
Canadian is on a distinguished road
Default

Quote:
Originally Posted by StirCrazy View Post
Oh Andrew, I never said they are aceptible or not aceptable, if you go back and look at 99% of my posts on the T5/MH issues it was when people were claiming T5's were more powerfull then MH, and you were one. and if you read carfullyI said many a time that you could grow SPS under a NO bulb as it was done before buy a guy on this board.

your Hi quality T5 set up you showed there, is there any distance referances? and whats the point of taking readings int he air 1/2 way between the reflector and the water? so just under the surface it looks like he has a 575 average in the well lit area. at the bottom about 280ish. the hot spot is a little higher than the numbers but the other areas are lower. (I never realized the hot spot on T5s would be that pronounced) at any rate His number were very comparable with your high end T5 with new bulbs. although we would need measurments of all the reading positions to be sure. so what happens if he adds more LEDs.. nothing, bt if he adds more LEDs to reduce his spacing then adds 40 degree optics his numbers should jump by about 50% from what I have been seeing. if he adds more and then goes 20% optics.. problem is the spacing is so tight on 20% or lower optics it would only be a reasonable cost on a 20 gal tank or less, but man would you pack some punch. I know there are some people trying the the newer bulbs that have about 3 times the output as the ones Ron is using but they don't make that strength in a Royal blue yet so it is only good for the white and they are finding it is to powerfull for any other lighting they try to give it a blue look as it just washes it out. now if you like the icewhite look to your tank, which I tend to.... they might be a awsome bulb to try. I am actualy going to buy a handfull of LEDs and build a tiny cylinder that is about 24" tall but small enough aroundI can lighting it with 2 or 3 LEDs so I can try some different combos on my Ardunio and see what kind of color blending, lenses and PAR values I can get a different depths. just have to clean my shop out first.. which at the way I am goiong should be another 6 months

Steve
False. Steve, I never once said that T5 was more powerful than MH. That is patently false. I expect you to go back and provide a quote in context to substantiate that I ever said it was more powerful. All I ever maintained was that T5 was not inferior to MH when you made broad-based statements about inferiority and superiority one way or the other.

The tank pictured above is 5' with a 4' fixture over it. The tank is 60 x 30 x 24. The fixture is roughly 6-7" above the water's surface. The edges of the tank are dim because the fixture does not extend to the edge and because the first 3" or more of a T5 lamp produce significantly less light. Within the 3.5" feet centered below the fixture the PAR is pretty consistent (biased on one side because that's where the fans are).
__________________
SPS Dedicated 24x24x20 Trimless Tank | 20 g Sump | Bubbble King Mini 160 Protein Skimmer w/ Avast Swabbie | NP Biopellets in TLF Phosban Reactor | ATI Sunpower 6 x 24W T5HO Fixture | EcoTech Vortech MP20 | Modified Tunze Nanostream 6025 | Eheim 1260 Return Pump | GHL Profilux Standalone Doser dosing B-Ionic | Steel Frame Epoxy Coated Stand with Maple Panels embedded with Neodymium Magnets

"Mens sana in corpore sano"
Reply With Quote