Quote:
Originally Posted by KrazyKuch
Here is the type of Check Valve I use this
I have it mounted horizontally and it works perfect........I needed one cause Having anti syphon holes on a dart with a single outlet would spray water all over the place and when I placed them lower in the water then my sump would overflow so I had to go with a check valve. |
hey man you can always use a piece of foam to allow the air to get in and still have the water get defused alot.
Quote:
Originally Posted by ZachAttack
yeah, that sounds like it would work. if you drill a hole right below the waterline (the lowest point of water that can be drained without overflowing the sump) the hole will let in air cutting the siphon...
|
exactly and try to dril a hole on a angle if you can. and drill it on the back of the pipe so if it does spray it will hit the tank and not go out front.......
__________________
180 starfire front, LPS, millipora
Doesn't matter how much you have been reading until you take the plunge.
You don't know as much as you think.
|