View Single Post
  #46  
Old 09-17-2009, 08:00 PM
danny zubot's Avatar
danny zubot danny zubot is offline
Member
 
Join Date: Apr 2004
Location: Castlegar BC
Posts: 3,469
danny zubot is on a distinguished road
Default steps 8 through infinity

For the past week I've been tying up all of the loose ends before the big move. I managed to get the bar and room finished, well, as far as a I can for now.

I moved the fuge and sump first so that I could get 90% of the plumbing done before the tank move. Here's a shot of them. The tank drains to the fuge where I have my 2 stage GFO/NO3 reactor as well as macros and some live rock chunks.



Then from the fugethe water drains into the sump. I have my ASM G3 skimmer, carbon bag, filter sock, heater, PH probe, thermometer sensor and return pump all situated in the sump.

You can see on the right that I used a one way check valve and union for the return line. I ran it into my SQWD and then up to the tank via mostly 1" line. With all of that plumbing I figure I went from a 950 GPH pump to only 600-650 GPH. I guess thats fine seeing as how it only runs out of one exit at a time.
__________________
THE BARQUARIUM:
55 gallon cube - 50 lbs LR - ASM G3 skimmer - 30 Gallon sump - 22 Gallon refugium / frag tank - 4x 24 watt HO T5's - Mag 9.5 return - Pin Point PH monitor - 400 watt XM 20K MH in Lumenarc reflector - Dual stage GFO/NO3 media reactor - 6 stage RODI auto top up -Wavemaster Pro running 3 Koralia 2's.

Fully stocked with fish, corals and usually some fine scotch
http://www.canreef.com/vbulletin/showthread.php?t=55041
Reply With Quote