Quote:
Originally Posted by Myka
Ok, this is funny. I'm arguing with a friend about which side the rubber gasket goes on a bulkhead. So I need some proof that I'm right. 
Does the gasket go on the inside of the glass (the wet side), or the outside of the glass (dry side)? |
Flang side, always. other wise it can wick through the threads.
also there is no better way to install it.. it all depends on the type of bulkhead you have and how much room you have to the nut to spin on. I had them both ways as if I was doing a through bulkhead to the inside and I wanted to add piping and a strainer it just worked out better.
another reason to put it on the dry side might be if you are doing a closed loop and you don't have much room outside due to a wall or cabnet then you want the flat side on the outside to give you more room.
Steve
__________________
*everything said above is just my opinion, and may or may not reflect the views of this BBS, its Operators, and its Members. If cornered on any “opinion” I post I will totally deny having ever said this in a Court of Law…Unless I am the right one*
Some strive to be perfect.... I just strive.