Quote:
Originally Posted by Mr OM
based on the link that is a 3/4 threaded bulkhead, but a 3/4 nipple cut it in half, thread inside the bulkhead and adapt to a 3/4 union. should be pretty easy.
If you are trying to thread over the bulhead you likely will not find the correct thread.
|
sorry mr. OM is not threaded on the inside only on the outside it has the threads. but i guess i can still do the same thing. use a 3/4" pvc pipe slip it in put the union on...so i guess there isn't anything that will thread over the bulkhead to a 3/4" reducer?
thanks for the help btw