Thanks for the details Shao. This set up seems to take up less take space which I really like. So now I'm leaning towards having two 1.5" bulkheads through the end of the tank and making an overflow box.
I think I'll look around and see if I can find all the pvc pieces. If I have a threaded bulkhead that would make finding the parts a little bit harder. I think J&L's 1.5" bulkheads are threaded.
Dale, would you know if Southern Drip has slip bulkheads up to 1.5". I seem to recall only seeing slip bulkheads up to 1" there.
Thanks again guys
Bill
Quote:
|
Originally Posted by smokinreefer
i wouldnt go down to 1".
use 1 or 2 1.5" bulkheads.
noise is minimal, it is basically a durso standpipe, only now it is outside the tank.
i use black flex hose from the drain to the sump...thus i get a smooth curve down to the sump.
for the inside of the bulkhead you just need a 90.
for the outside, i used a "street tee", threaded, but a normal "tee" is fine as well. and you'll need a cap, for the top of the "tee" (dont forget to drill a small hole on the top of the cap, for adjusting the air for the durso)
and youll need a barb fitting for the drain hose.
i bought my black flex hose at HD, its where all the tubing is, they have a package that comes with 25' of the flex hose, a 1.5" barb and a hose clamp for ~ $15. way cheaper than buying the pool/spa flex hose, barb and clamp seperately.
|