View Single Post
  #32  
Old 01-17-2009, 08:21 PM
bullit67's Avatar
bullit67 bullit67 is offline
Member
 
Join Date: Jan 2005
Location: Mission B.C.
Posts: 185
bullit67 is on a distinguished road
Default

Victory is mine

I got the sump room up and running after a week of 16 hr days and sleepless nights it finally came to life last night or should I say this morning at around 1AM. Only one little leak on the outlet of the return pump. I will deal with this today I am going to try and double up the teflon tape and see if it will seal I cant crank the fitting down any more as it is pulling on the plumbing.

OK got rid of the long length of spa flex put in a length of schedule 40


This enabled me to secure it to the structure in the ceiling so it wont pull on the plumbing that is under the tank as this was causing a problem with the previous set up.


The drops are in place and tied in to the ceiling I need a new piece of glass cut for the top of the sump the plumbing was putting pressure on it when it was on the old sump under the tank and broke it around one of the bulk heads


WHOO HOO!!!!!!!!
Time to filler up


All right it is up and running the New Bubble King is in place and running But I need to make up more salt water.


Magie Still keeping an eye on things making sure I do it right
Reply With Quote