Quote:
Originally Posted by StirCrazy
how are you going to compensate for the change in cycles?
yes I agree, use individual plug GFI on each outlet so you only lose the circut that has the problem, if you have two of anything (pumps, lights, heaters ect) make sure they are on different circuts, this way if you lose one of your pumps the other will keep going.
Steve
|
What change in cycles??? 120/240 IS 110/220 It's the same. I have just allways called it 120/240 throughout my electrical carrier. But, if you were to measure voltage at alot of different peoples houses, you would find that it ranges between 110/220 and 120/240. There is no one SET voltage. It fluctuates
Think of the household power as 2 1.2v AA batteries put together end to end. Now take a wire from each end, the + and the - of the other one., and also one from between the middle of the two batteries.
Now, from one ouside wire to the center, it's 1.2v, across 1 of the batteries. Same for the other wire to the middle. Now from outside to outside wire, thats 2.4V. Both batteries added together. Thats like how your house 120/240(110/220) power system is. The Neutral wire is the center wire between the batteries. Between 1 wire and neutral =110, the other wire and neutral, 110 as well, but a different power supply basically. Between both wires, the power supplies add together and theres your 220.