[dsaundry]

Ok I will put my 2 bucks in.
I own an automotive repair shop and yes some of the prices you got seem high, some are not. The transfer case service does seem quite high and without a detailed report on what they do when they service the transfer case and differential fluids next time I would check around. As for the fluid types, full synthetics are quite expensive compared to regular oils, As for some of the advise about what to get done, your manual is a pretty good guide in most cases, however you can go to any warranty approved shop and get the services done there, The average dealership here is about $120.00 per hour and the average shop is about $90.00 per hour, so you save some there. As for the coolant flush I agree to go green, the north american manufacturers seem to have a problem developing gaskets that stand up to the degredation of the long-life coolant. Green is better and there are animal friendly versions out now as well. Tune-ups are a word of the past, there is only scheduled maintenance now. Spark plugs from a lot of manufacturers and aftermarket suppliers are rated at well over 120,000km, but on higher milage cars I wouldnt put a long-life plug in. A regular v-groove actually works better. A bad oxygen senseor will screw up a motor real quick{sorry asmodeus} I have seen that firsthand, but the pcv price seems high too. Depends on what motor you have as far as labour goes, some spark plugs a real pain to get at and pull. Jeeps included. Try doing plugs in a newer Ford with a Triton motor in under 2 hours. Bottom line is if you feel you got hosed find another shop, ask around. There are a lot of good honest shops out there as well.
Ok just to stir the pot even more, A coolant flush would definately be recommended at 50k It deteriorates too quickly,not to flush the coolant can screw up a heater core. Pcv valves are important! 75/140 is about $20 perlitre. Mark up on parts is not where shops make their money, to the heavy duty mechanic. Try paying out insurance for your buildings, payroll tax's, Insurance for the techs, benefits, etc etc etc, and I hate to say this but you are all lucky the dealerships and private shops arent charging $200.00 plus per hour...By the way..its coming, The "Mechanic" has taken a bad rap for a lot of years, not all deserved, now that vehicles are changing to computerized modular systems you need to study a lot just to work on them, let alone the equipment to work on them. Nobody seems to have a problem giving a lawyer $200-500 dollars an hour, but look out if the shop charges you $200-500 to do your brakes. As for my qualifications I am inter-provincially licenced, a master tech and I get a lot of vehicles towed to my shop that a lot of back yard wannabe techs try to fix themselves. I go to courses every year just to keep up to date on the advances[good+bad] that are coming out. So do I think I am worth less per hour than any lawyer...or anybody else..Nope.