[StirCrazy]

also blogs seam to be backwards from the way stuff is entered, so it looks like your putting water in befor you even look at the equipment.

I think the lighting section needs to be revamped, trying to group LEDs MH and T5s togeather doesn't work as they are still very different lights and intensities, SPS will grow under a NO bulb if you saet it up right, so saying you need this or that isn't realy accurate with out more explanation.

you could talk about Floressents and then go through the types starting with NO, VHO, PC, T5
then talk about HID and there different sides and types,
and finaly mention LEDs

I still have not seen anyone with a sps domanated tank using LEDs only or have heard no feed back at anyrate, so I don't even know if I would mention this in a newbe guide.

Are you doing advanced or newbe, you don't need a phosban reactor, heck they wern't even invented untill my tank was running 5 years already, do I have one... yes, do I use it no.. I am converting it into a CO2 reactor for my fresh water planted tank.

for flow wiseI would say for a SPS tank 20X flow rate is to little, that would be a min for a softy tank. IMHO, for SPS 50X would be a min, but how are you making that flow how much is through the sump or do you even have a sump as a choice?

Also getting back to the advanced/newbe you start talking about all this other stuff Zeo, ect... Keep it real simple, tank, lights, flow, skimmer, and some way of maintaining Ca, Alk, Mg ect.. ,mention that you can dose them as required, then mention that a Ca reactor and Kalk can work, if you go right to the advanced stuff it will discourage a lot of people because of the work involved and the cost. there are ways to have very low maintenance tanks that are very nice.

Steve