Should just be a straightforward swap... There are two wires that go to your lamps. There should be two wires from your ballasts. If you have magnetic ballasts with capacitors the two wires will be 1) from the core and 2) from the capacitor. (If pulse-start there will be three things not two.) But the bottom line is two wires to the socket. Replace everything downstream of these two wires. (It's probably harder to describe than to just do.)
__________________
-- Tony
My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee!
Last edited by Delphinus; 12-07-2008 at 10:00 PM.
|