Tank and Metal Stand 800$obo
the tank is 2' wide 9' Long and 18" deep it has low iron glass on one of the viewable panels. it has 2 corner overflows diagonally across from each other. i bought the tank this way i don't fully understand it but it works. one of the over flows is drilled with 1 1½" hole and 1 1" hole. the other over flow has 2 1½" holes and 1 1" hole. the bottom of the tank is drilled for a closed loop system that was run by 2 ocean motion 4 ways on sequence hammerhead pumps the bottom of the tank has 2 2" holes drilled in it for the closed loop return to pump and 16 1½" holes for return to tank. this setup worked well for me. the tank is euro braced and has a center brace. unfortunately due to the size of the tank it was required that i cut it apart to get it down my basement stairs, so the purchaser of the tank would have to have it resiliconed together. if your not up to it i know the man who built the tank, and could probably arrange something with him to rebuild it for you.
the stand is 48" tall built out of 1" square steel tubing. i had it modified from its original height of 32" so that it was at a more comfortable viewing height. you could always have my height reduced and re welded to whatever height you chose.
Richard
403-818-8272