[KrazyKuch]

Originally Posted by Delphinus

Currently, I'm at a bit of a standstill because the joists have more flex to them than I anticipated. I only have 1/2" of clearance between the framing and the top of the tank, and it appears that if someone walking in the living room directly above, hits the "sweet spot", there is about 1/2" of flex in the whole joists. This means the framing actually can contact the tank. Not good.

I haven't quite figured out how I'm going to solve this. The drywall should take out some of the flex but I'm not sure I want to rely on the drywall to prevent my tank becoming a "load bearing wall."

I might try some cross-bracing, or, I might end up putting a corner post on the right. This second option should work well but it would involve some creativity on the finish to keep it looking good. My main hope is to avoid it looking like an afterthought (even if it IS an afterthought).

hey tony your best bet for that flex is to put another joist right beside it...in other words to double it up, that should stop it from flexing and will still look the way you want it to in the end!!