@reef:
The dosing pumps have a flow rate of approx. 60ml/min. Due to tolerances of the motor or the pump it is possible that a pump has a different flow rate. You can correct the parameter "flow-rate" if needed. This parameter influences the calculated "on-time", not the speed.
Please see manual chapter "dosing pumps".
Error1: while the first seconds of boot-up ProfiLux can't communicate with View - than Error 1 is displayed. After boot-up is completed View starts to work - no problem
combo-card: there is no place for a print on the rear plate. But with each card is a manual shipped. This manual describes which functions the BNC-plugs have.
@teejay:
You can find the SSID also on your PC under "properties" of your network-connection.
|