Here is a photo journal of my corner hood.
Here is the dual 175 w MH.
I started by laying out and cutting all the pecies for the basic structure.
I then glued and screwed the pecies together and painted the wood with a marine primer and black paint and sealed it in a non-toxic water sealent.
I then layed out the reflectors and drilled the holes and bolted in the first fixture.
I made a gap between the hood and the reflector to promote better cooling
I installed two 100 cubic feet per min silent run cooling fans.
and the last fixture
after I installed a "Thermo Switch" for the fans and put all the wires in jackets and brackets.
I also built a DIY moon light and instaled it in the hood.
