No unfortunately I never detailed the tank setup in a thread. I really should have, ooops. It's a 30x30x30. I'm running a Rio HF32 as the sump return (mistake, it's too much flow through the sump and I have a bad microbubble problem - I'm considering downgrading the pump) and the main flow is 2x6100 Tunzes on a multicontroller.
Although I will be pulling the Tunzes and installing them on my 280g when it goes online. Unfortunately they are a little too pricey to have 2 sets onhand. I haven't figured out what to replace them with but it will likely involve a Wavysea waving back and forth. Might be a closed loop or it might be a Seio attached to the Wavysea.
I imagine if the bulkheads had a bead of silicone underneath there's no reason to believe they'd ever leak. But, I have to admit, I'd still be a little nervous about it. But there are tanks out there that do that.
__________________
-- Tony
My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee!
|