So the other night I was considering the feasability of zeovit in a nano-sized tank. Namely in my 24 gallon tank. I thought about bringing up a discussion on the subject.
zeovit guide here:
http://captiveoceans.com/pdfs/ZEOgui...%20English.pdf
It states that you need the following:
- efficient strong skimming
- sufficient lighting
- optimization of nutrient addition
- addition of elements at low levels
- optimum water parameters (ca, mg, k+, KH, salinity)
- regular weekly water changes
- sufficient water flow
- use of live rock etc
In a nano tank, most people already do weekly water changes however skimming is rarely used because of the larger 25% weekly water changes.
I've read through the zeovit guide and found it recommends efficient strong skimming:
"...the basis of this method relies on export of harmful substances through skimming" (zeovit guide p16).
The larger than normal water changes in a nano tank performs this function.
Now another requirement of zeovit is the reaction chamber. After calculating the requirements of a 24 gallon tank I found I would need 240mL of zeovit. A very small ammount which doesn't justify spending the $$ on a large reactor. So I thought about a HOB filter. Now one requirement of the zeolite is making sure the zeolite does not make contact with air. Thus, care would have to be taken to ensure the zeolite is at the very bottom of the HOB filter so if the power goes out the micro-organisms in the zeolite aren't damaged.
Another requirement is the addition of trace elements due to adsorption by the zeovit system. I'm thinking the larger than normal water changes will accomplish this just fine.
I'd like to hear about people's personal experiences and how they think it could be applied to the nano aquarium.