Using kalk only will maintain add calcium and help with alk. levels but I have always found the alkalinity to drop in kalk only tanks. I and others doing the same, add a buffer once a week or so, to maintain alk.
My co2 reactor, maintained both my calcium and alk. as Brad mentioned his did. I found my alk was always on the higher side, pushing around 11.2dkh.
I think most running a co2 reactor, use a kalk reactor or drip, to help boost calcium in a heavy demand tank and also as mentioned, to help with ph levels. However I know of several co2 reactor users who dont follow this idea, as there reactors are sized large enough to provide calcium & alk, plus they also seem to maintain high enough ph levels with no kalk.
I like kalk myself, as its cheap and easy to use. I have never used a reactor though, just dripping now or mixing it in my top off tub when running my larger tanks.
I would say keep the co2 reactor running the same or back it down a bit and keep using a good kalk mix to bring calcium levels up, with perhaps a bit of Reef Advantage or whatever you use, to increase the calcium levle some.
Whats the alk. reading on the reactors output? If mine got a bit ot high, I think I decreased the co2 amount a little, which usually lower it. Cant remember for sure but think mine was running in the low to mid 20,s dkh area.
__________________
Doug
|