Drew no problem on drilling the holes. I have a 1.5" d-bit hole saw and I am about 13 of 15 for the good. 20 gallons I found to be the trickiest but the thicker the glass the easier. Drilling a 33 is no problem.
My own project will be starting as soon as I come up with 4 20 gallon tanks. I already have 2 pieces of 1/4" 24x24 for the bottom. So I am going for 24x24x16h 40 gallons and will make an extra one possibly for sale. I haven't determine how I will drill it out whether in the middle or on one back side, I was going to see what you did and how it worked out. You jump first Drew!!! LOL
Kevin
|