ProfiLuxControl II version 3.02 can be downloaded:
http://www.ghl-kl.de/Produkte/Aquari...rolII_V302.exe
ProfiLuxControl is now able to access PLM-LAN or PLM-WLAN directly, that means without using the PC-software "Lantronix Redirector" (which offers a virtual COM-Port).
In the "connection" dialog of ProfiLuxControl II Version 3.02 is a new option given for "connection type": "TCP/IP direct". After choosing this option the IP-Address of the ProfiLux (eg 192.168.0.169) and the port (standard is 10001) has to be entered. That's all. Makes it much easier to establish the connection with LAN/WLAN.
In the attachment is a screenshot of the new connections menu. In this example you can see the settings for my network, please change the IP address for your needs. The port 10001 must remain!
Summary
The direct access (without using "Redirector") makes it much easier to configure & use the LAN or WLAN.
We still need the software "Lantronix DeviceInstaller" to assign the IP-address - but we are working on a new firmware 3.02 for the ProfiLux which will allow to enter the IP-address on the ProfiLux directly.
We understood that it is has been complicated for some users to configurate and establish the (W)LAN-connection and are working on solutions to make it easier! This was the first step.
Another improvement in this version:
The time-controls have been enlarged - so it can better be seen if it is am or pm.