View Single Post
  #15  
Old 01-02-2007, 06:58 PM
Chaotic Cricket Chaotic Cricket is offline
Member
 
Join Date: Jan 2007
Location: In a house
Posts: 86
Chaotic Cricket is on a distinguished road
Default

Quote:
Originally Posted by andsoitgoes View Post
Okay - first, the low side of chillers I'd need are only about 450 (only, hah) - http://www.jlaquatics.com/phpstore/s...t_ID=ch-pc002i

So that answers that problem.

I've got my light a good 4" from the water surface. And it's a Double-Ended HQI bulb as well. Other than the fan, nothing was taking down the temp yesterday, until I turned off the MH...

As for the thermo - I used 2 different kinds. One from my salinity testing probe and one from a coralife electro thermometer. Both gave readings in the 80's - 80, 81, etc.

In the summer my first thought was to just get a small window A/C which I figured would solve the problem, but I know that means I need to keep IT running 24/7 - Surrey in July, yikes!!

Maybe we should just move to Antartica? =/
I thought i might jump in here, this being my first post on canreef. Been around awhile, but the infighting on reefcentral kept me off forums for awhile. Still only lurk around there, but i like what i see here so i registered.


Anyways, most fixtures I've had, and I've had a few. Most manufacturers recommend at least 8 inches or so from the waters surface. I know people put them closer to the water for better penetration, but it brings in new problems. The gain you receive being that close does not outweigh the cost of a chiller. I would put your lights at 10-11 inches up, then move them a half an inch to an inch closer closer until the heat is an issue again, then you will have a balance. If you cannot go with a chiller you will find the fans that you use to cool it will have you constantly filling up with top-off water due to evaporation.

Last edited by Chaotic Cricket; 01-02-2007 at 07:00 PM.
Reply With Quote