I made some progress this weekend. I have wired one of the DJ panels to my power center. So the 8 switches will control the 18 outlets on the top row of the power center. The bottom row of outlets will plug in to the 3 circuits on the wall. So each DJ panel will have it's own circuit and the last circuit will be for anything I haven't thought about. The other DJ panel will be wired to the Aquatronica powerbars. There is one powerbar in the box to show where it will sit. The other powerbar is on my 67g tank being tested. Pretty cool stuff so far.
I also got my sump from Quinn today. At 48x26x18 it's pretty big. But since it's acrylic I could easily get it downstairs and in position on my own. The tank won't be so easy. The next couple of weeks will be pretty boring as I wait for the tank. All that's left is to finish up the electrical and wait...
Here's the view of the left side of the stand. The electrical is all isolated on it's own shelf. The panel on the left is wired to the power center. The panel on the right will be wired to the powerbars. The ACLS units will sit to the right of the power center.
The DJ panel box will be covered when it's complete.
Here's the right side of the DJ box with the Aquatronica powerbar.
And here's the stand is it is today with the sump and all of the electrical. I'm hoping I've planned for enough room for the rest of the equipment to fit to the right of the sump.
