RO vs. Victoria Tap
When I measure the TDS of my tap water I get between apx 10 and 15ppm . Since Calgary and other landlocked cities have values >100ppm it sounds like our water is almost pure straight out of the tap. But that is only taking into consideration the disolved impureities. Recently I set up my 6ft tank and leak tested the system with tap water....now looking through 6ft of tap water was eye opening....WE drink that stuff?! The color was slightly yellow and there was tons of tiny floating "organic bits" in it..I'm sure it is safe, but I now drink RO from the cooler LOL.
My point is that Victoria water has low disolved minerals but there is lots of other undesireable things in city tap water.....all removed with prefilters (including left over chlorine and chloramide or what ever else they use) on the RO system, then polished up to zero ppm by the membrane.
I think if a person couldn't afford the $100 for the Aquasafe RO/DI then a 1-3 micron prefilter with act. carbon would be my minimum Victoria water treatment.....for a reef tank.
Just MHO
PS. The tank filled with RO was a pristine sight to see.
__________________
John
its all about quality, not quantity.....
...when in doubt buy a Binford....
Last edited by IslandReefer; 04-19-2006 at 07:55 AM.
|