write down the modle of your breaker box on the front of it. Take it to a hardware store but the breaker and some wire clamps. Now on your breaker box u will see unused Knockouts. To be safe power off the entire box take out the knock out and put the threaded wire clamp into the knockout. Run your wire threw and wire it to the breaker. make sure if u dont have the wire hooked to a plug or your circut u have caps on the end. Now u Snap in the new breaker and power it back up. If u are running your wire out of the wall then it would be wise to use flex. pull the wire threw the flex and get a flex connector to hook into the breaker box.
For under my system i use all Liquid tight plugs and flex but it is real expensive
__________________
75gal RR Tank with 2 Seio 620 and 2 maxijet 1200, 2 150watt HQI and 2 Antic PC, Turbo Floter Skimmer with 9.5 Mag to tank and fuge, Sump is 75gal with a 22gal fuge, 40gal Auto topoff.
|