Quote:
|
Originally Posted by Tarolisol
I have tubing that directs the water up into the tube. So fill a bigger pump solve my problem or should i shorten the tubes by about a foot and a half?
|
what is your water hight in the skimmer? If you have it set so the water is only say 4 foot up the tube then you could lower the Beckett to just above that hight. also if there is a way for you to sleeve down the 2.5" Beckett tube to a 1" tube it would work a bit better I think. with those changed it might work with a mag 18.
Looking at that again is your 6" tube part 6 foot tall? you could probably cut that down to 3 foot and use the left over to make a kalk reactor or Ca reactor, or skimmit collection cup, but I would change the Beckett tube to a 1 inside diameter tube also.
Steve
__________________
*everything said above is just my opinion, and may or may not reflect the views of this BBS, its Operators, and its Members. If cornered on any “opinion” I post I will totally deny having ever said this in a Court of Law…Unless I am the right one*
Some strive to be perfect.... I just strive.