Quote:
|
Originally Posted by newguy
Its really easy to make this Beth. You will need:
PVC pipe (whatever diameter)
2 PVC elbows (same diameter as pipe)
1 PVC T (same diameter as pipe)
1 PVC Cap (same diameter as pipe)
PVC reducer bushing or coupling to connect PVC to pump
|
This won't work Harvey, the whole thing has to be completely sealed and if you just have a pvc cap then you'll probably draw micro bubbles. from the "t" you'll have to have a fitting that can be fitted to the smallest possible valve (ie r/o valve) or just have a union like Richer's diagram. If you glue a pvc cap on then you'll never be able to prime it again with ease. Hope this makes sense.
Des