Quote:
Originally Posted by calo247
wattages you add, you dont add the voltages together, a 24v supply will not work, you need a supply with the same voltage as your leds, and if they are different then you cant run them together off the same supply.
what is the voltage requirment of the strips? how did you get 19.5V?
from what i can gather (correct me if i am wrong) you are trying to run
- 1 led bar that came with a power supply rated at 13.5V
- 2 led strips that are rated at 12v
|
The strips (rated at 3 watts each, don't know the voltage, has 4 lights per strip) can be connected (both) to a 12v power supply.
Sorry I miscalculated the vottage, 19.5v is wrong.
Here's what I know:
Fluval LED bar: 13.5v 1500ma
Current USA LED strips: 3 watts each (6 watts total). They say 1 - 3 of these strips can be connected to a 12v power supply through a splitter.