Been thinkin' about new MP40s
 

I've listened to some MP40s, and I have MP10s

The MP40s I've listened to lately are used, and over 1 or 1.5 years old. They are very noisy, at least to me

I have one more option to listen to an acquaintance's MP40 on the same size tank as mine
He has a 10 and a 40 on a 75g

We'll see what happens but, I'm not holding my breath anymore as I am finding the 40s to be too loud for my liking ......

Check out sicce. They claim they are dead quite.
I have some on route so I'm looking forward to it. On another thread there is some one said there is a Canadian retailer.

Down fall is there in tank like hydor

That's too bad that they are in-tank

I would consider the Tunzes, but same problem

Thanks for the insight

I'm almost thinking I should re-build and do a closed-loop ( NOT GOING TO HAPPEN RIGHT NOW ) :smile:

I had a idea the other day about closed
Loop.
It was to use hottub jets as the spiral when in action.
The ones in my hottub have no Metal parts and fit like a bulkhead fairly flush

Hmmm
Weird thought you had there

I don't think many aquarium return pumps are strong enough to run hot tub jets, but, maybe I don't know enough

Anyway, not the point here ....

I'm not sure if Snappy is using the MP40s or bigger. I've heard his in person, and they were very quiet to me. I seem to remember corraline on them, so they can't be really new. Maybe he'll chime in.

I wish you could come and hear my 10s Shelley
Then you might say different .....
My 10s are very quiet
One is just over a year old and the other is brand new
I'm hoping I am wrong, but the 40s I have heard so far are far too noisy for me

The 40's are loud, unless you turn the speed down....and then whats the point of having them :lol:

all the mp40's I have heard have a loud whiny sound when they start to spin I think to me its a bit annoying, but if my tank was in wall, I would go for it for sure.

I agree with the noise we all hear - it's just too bad that the 40s are so grindy sounding
I was hoping to move the same amount of water with an MP40 on, say, 50 or 60 % instead of an MP10 on 100%, thus reducing the total noise output :wink:

But, after listening to the ones I've been near to so far, I'd say the 40s are mucho louder than 10s, even at low speeds. The 40s tend to growl and grind, whereas the 10s only have a higher-pitched whine/whistle to them ... kinda like a street-vacuum-truck-kinda-noise in the distance

I got some tips from Tang Daddy
After a conversation with him, I changed the setting and may even try the 2 pumps I have on different panes of the tank
So, today I will move them around, instead of the standard locations recommended by EcoTech, and we'll see what happens :mrgreen:

This may even lead me to buy a 3rd 10 ... who knows :noidea: