Profilux and AI Programming
 

Looking for help getting started...the only thing that seems to be working is the manual control...

You will need to program the channels.. you need to at least program channel one, and use the same setting on channel 2 and

Sol blue uses 3 channels. Not sure about sol white, most likely just 2 channel.

so far i can only get one blue going...and only @ 100%...no option to adjust % ...

Go into lighting set up in profilux, select special lamp and set up accordingly then you can use light settin 1,2,3 to set up the three different channels of AIs.

I selected the Aqua Illuminations assigned channels 1, 2 & 3...now where do I go from here...

That's it. Just plug your power into a always on socket or a wall plug.
I know it's so easy compared to everything else.

J

ok so where do i go and adjust the lights to my liking and % ...seems like nothing is working...the only thing that i can get going is in the light senerios and manual thunderstorm...

what does the Light Composer do...Illumination 1 to 8...Simulation...Thunderstorm...Light Senerio and Illumination Overview all do...

Now, programs the channel 1-3.. Set the time and intensity for all 3 channels.

where do u do this...