![]() |
Where to buy mini bearings?
Anyone know where I can find mini bearings locally? Im looking to replace the bearings in my MP40. Ive tried PM Hobby but they dont have the size im looking for (size 607 and 698).
If nothing local, any online sites you recommend? Otherwise im going to order off eBay. Thanks in advance! |
Dave at concept is an authorized Ecotech repair dealer. Have you tried him?
|
Quote:
|
Quote:
Quote:
|
I brought the magnet barring assembly from my mp40 to a local tool/ electric motor repair shop and they swiched them out for 20$ in 5 minutes. I had to call a few electric motor shops before I found one with both barrings in stock.
hope this helps. -Cade. |
|
You can try one of your local hobby shops to source a bearing in those sizes (8x19x6 and 7x19x6). Ceramic would be higher end bearings, but they are generally used in nitro engines, so they can take a beating regardless.
|
Quote:
Quote:
|
From one who has been bitten ....
I have MP10s I can't say much about experience with ceramic bearings, but I tried the stainless ones from BOCA referenced in the above post about replacement on reefcentral. My experience has left a bad taste in my mouth. I spent $30 on bearings and lube, waited 4 weeks for my shipment, then contacted BOCA, they re-shipped, then waited another 2-1/2 weeks before they arrived. I installed the stainless bearings and one of them is noisy, so I have decided to purchase a new dry side. BTW, neither new bearing was quieter than the old ones I pulled out when I shaft-tested them. Whether or not Cade had a good experience with new bearings, I recommend you bite the bullet and buy a new dry-side. If you do try replacements as I and many others have done, you'll only waste money trying to find the correct, quiet bearings, only to find that they are just as bad or worse than what you started with. |
BTW, I have an MP10 Dry side for sale.
$40 no shipping |
All times are GMT. The time now is 01:54 AM. |
Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.