Canreef Aquatics Bulletin Board - Profilux Leakage Sensors now available!

Canreef Aquatics Bulletin Board (http://www.canreef.com/vbulletin/index.php)

- Progressive Reef (http://www.canreef.com/vbulletin/forumdisplay.php?f=131)

- - Profilux Leakage Sensors now available! (http://www.canreef.com/vbulletin/showthread.php?t=83185)

Profilux Leakage Sensors now available!

GHL has shipped the Leakage detection units to Aqua Digital and we will be stocking these immediately.

Details:

Leackage-interface

Part Number: PL-0851

Is connected at the level-input of the ProfiLux
Included: PS/2-cable (2 m) for connecting with ProfiLux
Contains 2 ports for leakage-sensors

http://www.aquariumcomputer.com/Syst...rz_400x199.png
Leakage-sensor

Part Number: PL-0850

Safe detection of a leakage through 80 spring-loaded contacts on the bottom side of the sensor (picture on the right).
A leakage-interface is necessary for operation.
Included: Cable (1.5 m) for connection with the leakage-interface
2 mounting holes
A second port makes it possible to connect several leakage-sensors in a row - multiple measurement loacations increase the security.
Only suited for the detection of conductive water (sensor doesn’t work with osmosis water)!
Please note: Sensor must not be submerged! Only the 80 contacts on the bottom are allowed to get wet.

http://www.aquariumcomputer.com/Syst...le_300x198.png
http://www.aquariumcomputer.com/Syst...om_200x133.png

Pricing to be released tomorrow, I would expect to have these in stock shortly. I'll be making hte items available for pre-order tomorrow!

Gareth

I am in Gareth, Let me know. Thanks.

Got you marked down for one, I'll put the packs up for sale tomorrow once I get confirmed pricing.

Are you going to go for the basic Interface + Sensor, or would you like extra sensors?

I will need an extra sensor. Thanks.

they are in stock, so no reason why you cant buy

Okay i'll contact Gareth.

Quote:

Originally Posted by ProReef (Post 683273)

Only suited for the detection of conductive water (sensor doesn’t work with osmosis water)!

:cry: thats no good.......it's always my ro/di that likes to make a mess.

any plans to make one that detects ro/do/top up water for the profilux?

it works on a conductivity reading, if you check the main support forum you will see european users have tested this and it works fine due to the floor contamination.

Ok the parts are now available for ordering online!

Here is the Leakage Starter pack that includes both the Interface and Sensor:

http://www.progressivereef.com/prodd...od=GHLleakpack

And here you can purchase the extra Leak Sensors to add on to your interface:

http://www.progressivereef.com/prodd...=ghlleaksensor