2 part epoxy questions
 

Not knowing whether I should pose this here or in the Tips and Tricks section, but here I go ...
I have South Seas Base Rock. It's dry and clean. I drilled it and stuffed acrylic rods into some holes, but didn't like the stability, so I then bought some 2 part putty.
I soaked the rocks in water, applied the putty, and let it cure for more than the 4-6 hours recommended @ the required temperature. Everything seems to be solid, but now I have a potential issue ...

Do I have to keep it wet, now that I have stuck it together?
If so, looks like I'll have to buy yet another rubbermaid or 2.

You shouldn't have to now, the moisture helps the epoxy cure, which is why you wet the rocks. Once it's cured it should be hard as well.. a rock.

Thanks, that makes perfect sense to me. I guess I'm hoping to hear from someone who has left theirs out of water.
Either way, it's out of the water now so I can do the next batch.

it will cure in or out of water just fine. I've left epoxy to cure out of water.