![]() |
Help! Vertex RO-DI 90 degree Elbow
I broke the 90 degree elbow connecting the carbon to the RO membrane. It is a 1/4" adapter for the hose with a threaded end going into the cap, I am looking for a replacement solution,where I could get something similar? Thanks for looking!
http://www.melevsreef.com/pics/rodi/spare_elbow.jpg |
Try Home Depot or EMCO.
|
+1 HD here in the lower mainland
|
I have a similar unit to yours and I don't see in your picture how you broke it. It's supposed to have an o-ring on the male threads to the RO inlet. It bottoms out in an awkward position, but it's supposed to seal on the o-ring.
What is wrong with yours ? |
That picture is just for reference off of meleevs reef, I snapped the connector where the thread starts, and yes there is a o-ring that goes between the cap and the adapter. Thanks for the help so far, I'll check out home depot and other plumbing places and hopefully find something.
|
+1 Home Depot in Airdrie had them, so I'm sure you can find one in Calgary. I did the excat same thing.
Avrbuster |
K thx I will try home depot!
|
All times are GMT. The time now is 03:10 AM. |
Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.