BUBBLE MAGUS BM180CS-P dimensions needed
 

Hi,

I'm looking for dimmensions of BM180CS-P.
I would like to compare it with BM NAC7.
I would like to modify my NAC-7 to work with better pump like PSK 2500 but I don't know that cylinder will be suitable for more air in reactor area...

Thanks for help

BRS site has the dimensions

HI!,

What is BRS?
I'm looking for specific dimensions like dimension of cup, cone, tubes, etc...

Bulk Reef Supply
I have a BM180-CS, what do you want to know?

if BM180cs is the same as BM180-cs-p ( with pump outside of body )
I need to know:
1. Width and height of cone ( diameter bottom and top of cone )
2. Dimension of internal cylinder in cup ( W X H X diameter )

I need to know that PSK2500 will be work with NAC7 body...

mine has the pump in the body

P version has outside, look :

http://www.bubble-magus.com/bubble/u.../BM180CS-P.jpg

This is what I want to do.
When the pump is outside you get more time for blending water with air in reaction area.

mine looks wider at the base, it's hard to tell with picture

according to BRS site the NA7 has a max cyl diameter of 9"
the 180-CS has a max cyl dia of 7"

bubblemagus site says the 180-cs-p has a max cyl dia of 7"