Canreef Aquatics Bulletin Board

Canreef Aquatics Bulletin Board (http://www.canreef.com/vbulletin/index.php)

- Pump Specific (http://www.canreef.com/vbulletin/forumdisplay.php?f=175)

- - Barracuda (http://www.canreef.com/vbulletin/showthread.php?t=80555)

Reefer head

11-29-2011 07:50 PM

Barracuda

Hello Iam wondering if a 2" drain can handle a barracuda return pump with no worries thanks

mr_alberta

11-29-2011 10:59 PM

At 0' head pressure (4600GPH) most likely not. At 16' head pressure (2400GPH), then most likely yes.

Madreefer

11-29-2011 11:15 PM

They can be throttled back easily.

lastlight

11-29-2011 11:44 PM

If it's a full siphon it will pull a lot more too.

http://www.beananimal.com/articles/h...-aquarist.aspx

I know my 1.5" can't be maxed out by my laguna 4200 pond pump. After head-loss I'm sure I'm getting more than 3000 gph into the display (I do have it throttled back however I ran it full bore while I was curing/flushing crap off my rock)

Seth81

12-13-2011 04:35 PM

I have the Barricuda with about 7' of vertical head going through 1.5" Schd 80 and it flows 54 GPM. I do use the Barricuda to feed my two Jumbo reactors which results in slightyl less then 7' of head pressure.

I love my flow meters :biggrin:

All times are GMT. The time now is 05:50 AM.