![]() |
HELP HELP HELP SERIOUS PROBLEM!!!!!
Look at my Alkalinity specifically I was using test strips before, newb mistake I KNOW!! But what do I do!?!?!
PARAMS Salinity 1.0235 CA 320 ph 8.1 Ammonia 0 ppm Alk/Kh 27???? WTF? Phosphate less then .25 Nitrites 0 ppm Nitrates 0 ppm What do I do about my alkalinity? and my calcium is a bit low too! AHHHH I'M NEVER USING TEST STRIPS AGAIN! I am now using API liquid tests and ELOS SOMEONE PLEASE HELP!!:noidea::microwav: |
Change some water is your best bet whenever something is wrong with your water parameters.
How did it get that high? dosing & poor quality tests? High alk is not the worst thing to happen. If everything looks fine in your tank don't rush to change it back or you could cause more problems. Almost everything good happens slowly. |
Quote:
|
I'm not an experienced reefer yet but from what I see, one of your tests is still off.
I found this on the web for you Here's a chart that shows what alk should be in relation to calcium. Alk meq/L Alk dKH Calcium ppm 0------------0-----------360 0.5----------1.4---------370 1------------2.8---------380 1.5----------4.2---------390 2------------5.6---------400 2.5----------7---------410 3------------8.4---------420 3.5----------9.8---------430 4------------11.2---------440 4.5----------12.6---------450 5------------14---------460 5.5----------15.4---------470 6------------16.8---------480 6.5----------18.2---------490 7------------19.6---------500 So either you alk test is off, or your calcium test But wait to hear from others as I may be missing something Good luck |
Quote:
|
Do you have a good LFS nearby? And I mean a true SW store
I'd be inclined to have someone test your water for you Then you can crap on Big Als if it's deemed fair Until then, do some more research tonight so you can sleep knowing you haven't nuked your guys |
Quote:
|
Do a water change, buy some good test kits (Elos or Salifert) and retest. If your alk was 27, everything would be dead, so it's not 27. Ca is way too low and if you're using any good brand name salt, your number is off there as well.
To confirm, test the new water you make and post the brand of salt and the values. And find a good LFS that will give you better advice. |
And get that refractometer and get your salinity to 35ppt.
|
Quote:
Calcium at a SG 31.ppt salinity of 1.023(which I have) 405 ppm and magnesium at the same salinity is 1200 ppm these are the only values I can find.. |
All times are GMT. The time now is 06:18 AM. |
Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.