165 Gallon Plug-N-Play Empty Setup
 

I am selling my setup after it is completely empty of all its livestock, which should be soon so I wanted to advertise it now.

The setup will cost $1000 dollars and will include:

165 Gallon Display Tank with overflow box and four return lines on back wall. (6 feet by 2 feet tall by 22.5" wide.)
55 Gallon sump complete with refugium (48x16x12w)
Metal stand
All Plumbing components including an already installed silent herbie drain system. 2 inch drainage and 3/4 to 1/2" returns means you could crank out 30x water turnover no problem with the right pump in the sump. This could mean a system with no powerheads if planned properly.
Lock line return lines are also included.
Space saving stand I built.
1600 GPH return pump

I've been in fish for a good while and at this price I should have no problem selling the setup. If you are interested in a 6 foot MH light we can also negotiate something there too.

This setup will be plug and play. Here is a picture of what I was able to do with this setup:

http://i279.photobucket.com/albums/k...1/IMGP7393.jpg

Here is a picture of the tank empty on the stand the sump in picture is not the sump you will get, the one you will get is much larger, it is a 4 foot sump:
http://i279.photobucket.com/albums/k...a11/Herbie.jpg

Plumbing Picture:
http://i279.photobucket.com/albums/k...a11/Valves.jpg

This is sort of the sump configuration, its a bit different than pictured here now and better too. This sump was replaced with a bigger and better version.
http://i279.photobucket.com/albums/k...umpPlumbed.jpg

Can a mod please move this to the hardware section? Sorry.