Canopy Complete
 

Well after a hard days work my canopy is complete. Although i do still need to sand and stain, But that won't change want you see too much. I made the stand over a month ago. I'm still gonna wait till i fit it over my tank till i get some more metal halide
http://members.shaw.ca/jessehamel/100_0002.jpg

http://members.shaw.ca/jessehamel/100_0008.jpg

http://members.shaw.ca/jessehamel/100_0009.jpg

Nice stuff! What size tank is it going over?

great job,looks solid.what size tank is it for?

It mainly made from pine its going over top of my 75g

Nice job!

One suggestion that I would make if it's at all possible...

If you can remove the sides and flip them over so that the fan holes are lower towards the water you will find a HUGE difference in cooling. The idea is to not cool the bulbs but the air beneath them. I did that with my canopy and I was able to reduce temperature by more than 2 degrees after I changed it around!

Good luck,

Rob

Thanks for the suggestion, But i'll leave it as is unless i notice a larger temp increase when i add more. Then i'll give the other way a try won't be to hard to dismantel