![]() |
siliconing a tank
I have a spare 40g sitting at my house and i just re did the siliconing but it still leaks, so I am going to scrape it all off and re do it. any tips for a clean seam?? and one thing I forgot, is there specific marine safe silicone?
|
Zach,yes, you have to use a marine silicone if I remember correctly, some silicones are toxic. Can't remember if picked it up at Rona or Animal House in Chilliwack, might have even been Home Hardware. I will do some checking if I get time during work tomorrow.:biggrin:
|
re silicone
If I recall marine silicone has mold inhibitors in it and they are toxic to fish.
|
You want to use GE Silcone I it is reef safe. If you live near United and Mary Hill By-pass and you aren't in a rush you can go to Sabic Polymers and get GE 1200 Silicone wich I beleive is stronger and reef safe.
|
silicone
Thanks guys. I didn't realize that until after I got it siliconed so now I have to re do it :p No, I live in Chilliwack, so unless i'm in coquitlam mary hill is a bit out of my way if I can find it at other places.:biggrin:
|
I used GE 1200 with great results. When it comes to prepping the seams to be sealed, make sure your scrape them down, and then use something to clean them further. I used acetone to clean all my edges, might not be the best stuff, but it worked. Once you're ready, make sure you use masking tape on all the seams back 1/2" or so from the edges, run your bead, smooth it out, and then rip the tape off. It will give you a clean looking job.
|
re
OK, thanks... So what do I use to smooth it out with?? Last time I kept getting left with stringy fibres going everywhere...
|
Put on one of those thin surgical gloves. Mechanics use them too.
|
re
so with the gloves just use my fingers to spread the silicone??
|
Ya you bet, when you smooth it over you want to get a little coverage onto the masking tape aswell so your edges look top notch. I will try and find you a couple pics of what we're talking about. You should be able to find gloves at canadian tire, rona, all the places for a half good price. If all else fails, "borrow" a pair from the first aid kit at work haha :redface:
|
All times are GMT. The time now is 12:44 AM. |
Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.