need help/advice
 

Hello all,

Well i think some of you but my bubble counter broke on my regulator (the one from SWC) for the CR quite a while agao. I emailed jayson and he talked to the rep and said he could not get just the replacement part. here is a pic of the bubble counter

http://www.missolutions.ca/~sean/other/b1.jpg

If anyone has any suggestions on how to salvage it or anything like that I would be all ears! Jayson said he could cut me a deal on another one but I would rather salvage this if possible. thanks.

can you take a smaller pic :mrgreen: of how it sits in the unit?

Steve

here is the smaller pic:
http://www.missolutions.ca/~sean/other/bcs.jpg

it screws onto the regulator, the threads are half broken in the pic.

hope its still not too big :biggrin:

ohh, kinda big, hope your not on dialup!

Have you contacted Milwaukee Directly ?


Wendell

Do you have the missing piece for the top ... if so then use weld-on or superglue

Cheers

I was going to glue it back together but the peices were too small :sad: I'll give the manufacturer a shot, but Jayson said he talked to them already.

does anyone have the contacs for them?

no no, I mena whare it fits into the reactor. might be able to make a new one easy enuf. actualy I know I could but I would need thread sizes and tube size ect..

Steve

Jayson is the best to deal with.
I thought the bubble counter sat away from the regulator and was attached by a length of hose. I do things the hard way, I still add calcium and reef builder. I wish I had a reactor.
I hope you find an easy solution.

Keith