Canreef Aquatics Bulletin Board

Canreef Aquatics Bulletin Board (http://www.canreef.com/vbulletin/index.php)
-   DIY (http://www.canreef.com/vbulletin/forumdisplay.php?f=13)
-   -   Canopy or not????? need build idea's (http://www.canreef.com/vbulletin/showthread.php?t=55489)

banditpowdercoat 08-30-2009 03:47 PM

Canopy or not????? need build idea's
 
Well, the light spillover from my MH on the 150g is driving me nuts. Have to have the lights 6" off water to keep me form going blind, yet that heats water WAY to much. I am thinking of building a canopy, But have allways had open top tanks for my SW. I'm wondering how feeding, and cleaning ease is with a canopy on there? I hand feed my puffer and others.

Anyone got some building plans, or pics of their canopy's? I am GREAT with building from Steel/Alum, but not so good with wood. Need all the help I can get to make it look good LOL

Tank is a 150g, 24"w, 60"long

Kronk 08-30-2009 07:02 PM

This link might give you some ideas... LINK

banditpowdercoat 02-06-2010 09:45 PM

bumping this up, any more canopy plans or idea's?

mark 02-06-2010 10:13 PM

canopies
 
RC link

monocus 02-07-2010 01:39 AM

canopy
 
i basicly built mine the same way-a little more fancier out of mahogany-but i made it with one double hinged door and two pull out shelves for the lights-fairly easy-if you can build a box you can build a canopy

whatcaneyedo 02-07-2010 03:06 AM

Do you recall mine from when you were here? I just have a 'crown' on top of my tank. I can pull it off the tank in a second, it doesnt trap heat, it hides all the crap going in and out of the tank and it was very inexpensive and simple to build.

http://i254.photobucket.com/albums/h...Picture066.jpg

Kryptic4L 02-08-2010 07:14 AM

I figure a few sheets of aluminum and some velcro should do the trick.

kien 02-08-2010 07:56 AM

this is my open top canopy :-D

http://i1002.photobucket.com/albums/...g?t=1249486775

http://i1002.photobucket.com/albums/...g?t=1249486836

http://i1002.photobucket.com/albums/...g?t=1249486853

It was pretty simple to build. Great access on either side with swinging doors. My light actually sits on top of the canopy about 4 inches so there is a gap. I like it this way so that there is plenty of ventilation and I don't cook the tank. You can easily modify this so that your light is housed inside of it, or sit your light right on top of it with no gaps.

banditpowdercoat 02-08-2010 01:19 PM

How much light spill do you have with these open top styles? I want to enclose my MH's and get all the light possible into the tank. But fear the heat issues when I do. It's pretty stable now with no top, and fan blowing across.

whatcaneyedo 02-08-2010 06:00 PM

No light spill for me. My pendants hang slightly lower than the top of the crown so all of the light is contained within the tank.


All times are GMT. The time now is 02:58 AM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.