WTB Sump Edmonton
 

Looking for a 3' or 4' sump!

I would rather one with a refugium, but I am open to making some changes if I have to.

Please drop me a PM

Thanks

Doo

I have 4' 75 gallon if you want to make a sump. ( there's no baffles etc in it ) It's a little rough, could only be used as a sump, but it holds water.

I also have a 3', I believe it's 33/35 gallon. It was the sump for a used tank I bought a couple of years ago. I never used it, it's just sitting in my basement. It was poorly built so you would have to redo it. ( the baffles etc, the tank itself holds water fine )

I've got a 33g sump with a refugium I'd sell. I'll get some pics up tonight.

thank guys - i hope to find one that is ready to go if possible :)

Doo

Okay here's some pics.

Sump is a standard 33g 36x12x16 designed for dual or a split drain. Left side is 10.5" wide, takes an ASM G2 just barely. Middle (return)is about 8 inches and right side is just over 16, makes a good fuge.

http://i37.photobucket.com/albums/e8.../sump-side.jpg
http://i37.photobucket.com/albums/e8...r/sump-top.jpg

Only 2 baffles per side because I was doing pretty low flow. It should be able to handle about 900gph without bubble problems.

PM me if you're interested.