Tunze Pump control has never been so cool
 

if you are thinking about buying a Tunze Multicontroller, think again!!

For less than $325CAD you can bring home one of these babies!!

http://www.progressivereef.com/prodi...uxlight1-l.gif

The ProfiLux Light II not only can control up to 8 Tunze pumps and or waveboxes with advanced wave form features.

Furthermore you can control your pumps from the comfort of your home PC using the FREE GHL stable ProfiLuxControl software.

And if that is not enough the light II goes even further, providing Temperature control by adding a GHL Temperature probe to the unit/

And YES there is more!!!

The light II has 4 built in switchable plug sockets allowing you to set up full lighting control for your system as well.

OH wait there is more also!!

The Light II will also work with the GHL LED light effect sticks and spots giving you lunar and sun simulations as well as cool lightening effects!

ALL this for Less the $325CAD! And how much is a Tunze Multicontroller??

The GHL ProfiLux Light II is a complete win for anyone wanting Tunze control with some other amazing add on features to boot.

So where to buy - http://www.progressivereef.com/prodd...p?prod=PL-0385

In stock now but these dont hang on the shelves for long!

with this unit can i run 2 plugs for lights with seperate time settings?, control the heater if i add a temp probe? and use the 4th plug to control something else like ozone?
can it have other probes than temp? and more than 1 probe?

Hi

Yes it can do all you ask of it.

It only has one probe input and that is for temp, if you want more than that look at the Profilux beginner packs as these have all the featurs of the Light II but also providing full paremeter control also.

There are also 8 multiple input timer modes and the temp can control heating and cooling.

The devise works on the same profiLux control platform as the Profilux aquatic controllers so all the features available there for timers, Tunze control. Light control, LED control, can all be done with the Light II

can you add a module for extra plugs or probes later if you did want?
right now it would meet my needs but i might want a ph and orp probes later on.
i dont reall have a space on this tank to put a larger unit but would like a proflux if possible

Hiya

The Light II is astand alone unit, imagine a Tunze Multicontroller with heaps more added features

of course at some point although loaded with features there has to be a cross over point to the main controller range. So if you are looking for future progression then I would maybe suggest getting the Plus II controller on its own and add power bars etc etc as you wish to build the system. OR go for the beginner pack.

Here you can see the amazing features available to you via the Tunze control of the profilux

This is a screen shot of the profiLux control software

http://i71.photobucket.com/albums/i1.../Tunzepage.jpg