Canreef Aquatics Bulletin Board

Page 1 of 2

Show 40 post(s) from this thread on one page

Canreef Aquatics Bulletin Board (http://www.canreef.com/vbulletin/index.php)

- Reef (http://www.canreef.com/vbulletin/forumdisplay.php?f=8)

- - Water Change Prep (http://www.canreef.com/vbulletin/showthread.php?t=47843)

superduperwesman

12-30-2008 04:44 AM

Water Change Prep

Would there be any problems with mixing your water change water a week early??

I mix up a bucket and use half this week and half next. I can't see any problems especially b/c the bucket is covered during the week but thought I'd ask others?

Keri	12-30-2008 04:47 AM

I do it without problems. I think it's better than not mixing enough? As long as a PH is kept running in it

mark	12-30-2008 04:52 AM

I normally mix mine up a week before the change then it sits with a PH for aeration and heater.

Trigger Man

12-30-2008 04:54 AM

I used to make ro water and then add salt 24 h later, and then leave the buckets covered for anywhere from 7-14 days with no ph going and had no problems. I now make the ro water, let it stand for around 24 hours and then add the salt and proceed to do a waterchange around 1 day later (no ph), and have not had any problems.

banditpowdercoat

12-30-2008 04:55 AM

I constantly keep 15g circulating in a rubbermade garbage can. water change whenever I need it. Usually every 3-4 weeks

superduperwesman

12-30-2008 05:06 AM

See I don't really want to keep a ph running in 5 gallons of water for a week... seems like a waste of power. Do I really need to keep it circulating? What happens if you don't?

What if I put a timer on it so the power head starts up a few hours before my water change... or maybe for just an hour each day?

superduperwesman

12-30-2008 05:08 AM

Quote:

Originally Posted by Trigger Man (Post 372371)

I used to make ro water and then add salt 24 h later, and then leave the buckets covered for anywhere from 7-14 days with no ph going and had no problems. I now make the ro water, let it stand for around 24 hours and then add the salt and proceed to do a water change around 1 day later (no ph), and have not had any problems.

yeah I'd rather not use a ph for such a small amount of water. I use one to help mix the salt when I first put it in but if I had to leave it running all week I'd rather just mix up the water just before each water change

karazy

12-30-2008 05:10 AM

if you dont want to use a powerhead yo could maybe use one of those bubblers?

Keri	12-30-2008 05:11 AM

I doubt the PH I keep running is more than 15 watts, likely a lot less...a mere drop in the bucket of my allready spectacular hydro bill ;)

banditpowdercoat

12-30-2008 05:12 AM

Quote:

Originally Posted by superduperwesman (Post 372375)

Salt settles fast if not constantly mixed. Only need a little powerhead. I run a Mag350 in my waterchange bucket. uses like 18W or something??? A Koralia 1 or2 would be even better. But the Mag is all I had. Plus, I use it to pump the fresh change water to the tank

All times are GMT. The time now is 10:07 AM.

Page 1 of 2

Show 40 post(s) from this thread on one page