Canreef Aquatics Bulletin Board

Canreef Aquatics Bulletin Board (http://www.canreef.com/vbulletin/index.php)
-   DIY (http://www.canreef.com/vbulletin/forumdisplay.php?f=13)
-   -   Drilling a Via Aqua (http://www.canreef.com/vbulletin/showthread.php?t=46572)

dustin 11-14-2008 04:16 AM

Drilling a Via Aqua
 
Hi,

I've decided to set up a nano tank using some equipment I've had lying around for a while. I have an 11 gallon via aqua tank (similar to the one below) and a never used Rena XP2 canister filter. I want to keep the tank looking clean so I think I'll drill it. The intake and returns will be plumbed directly to the canister filter (no sump).

Does anyone foresee any problems with the following set ups with regards to intake/return placement? Can the canister filter handle having the intake below the water line (added water pressure)?


Option 1:

http://i103.photobucket.com/albums/m...ak/viaopt1.jpg

Blue = intake, Black = return

Option 2:

http://i103.photobucket.com/albums/m...ak/viaopt3.jpg

Left and right holes for returns, middle is intake. This would allow for surface skimming (if necessary). Return split into 2 could let me use a SCWD to create more turbulent flow.


Option 3:

http://i103.photobucket.com/albums/m...ak/viaopt2.jpg

Lowering the intake would allow me to hide it behind rockwork if surface skimming is not necessary.



Any thoughts or any other suggestions would be greatly appreciated. Thanks.


Dustin


All times are GMT. The time now is 12:51 AM.

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.